Are your kitchen tiles worn, dated and out, or do they no longer fit with the modern decorations? If you look out for the freshened look, painting the tiles could be a surprisingly easy and inexpensive alternative. While you are required to take care of certain palin prep work and select the righteous products, painting kitchen tiles is a relatively plain project for a novice DIYer. You would be amazed at how differ your kitchen looks and how well the paintwork lasts.
Table of Contents
Cleaning and Preparing the Tiles
Prepare the working space carefully before you begin. You don’t need to get paint splashed on your walls, benchtops, and floors, so take a certain time to cover any zones that you need to protect with a painter’s old sheet and drop cloth.
Clean the tiles throughout with a wet cloth and detergent. Any grime and cooking splatters on the tiles will block the primer and paint from adhering properly. To get an ideally smooth finish, serve the tiled space a thorough clean with a tile-cleaning stuff, or utilize sugar soap and a scouring cloth.
• You are also making a paste from the oxygen bleach powder like OxiClean. Scrubbing the surface of the tile with a scrub brush, dip in the paste, let it sit for about a few times, then wipe or rinse it completely clean with H20.
• If you check out any mold, you remove it by applying a fungicidal spray.
• Scraping out and replacing any grout that is in rough condition before you start will offer a great finish.
Sanding the tiles with a refined-grit sandpaper. Once the surface is drying, light way sand the tiles to score the surface, utilizing 220 grit sandpaper for ceramic tiles. This would remove any glaze and help the newest paint to adhere well. Once the surface is sand out, you’ll be required to wipe away any grit with a damp cloth and remain dust. Leaving the tiles to dry completely for 24 hours; after all the preparation is working, you really need to make certain the paint will stick.
• Using an electric sander would make the job easy and quick if you have a huge space.
Priming the Tiles
Mask the edges of the working space. Use painter’s tape to mark out your specific zone, make certain you utilize longer runs of tape to serve you the straighter edge and press down firmly. When you have finished, mask the edges, serve the tiles a final fast wipe with a dampened cloth to eliminate all the dust, and leave the space for an hour to ensure it is completely dry.
Prime the tiles with a higher-quality epoxy primer. Purchase primer from the local hardware or painted store and apply it evenly as per to the manufacturer’s instructions. Permit the primer to cure and dry; dry out times do vary a lot so checking the instructions on the specific product carefully.
Choosing the right primer for the specific tiles will ensure you get a great result.
Sand and clean the tiles the second time. Once the primer has been cured, light way sand the tiles surface again and wipe out any dust with a dampened cloth. The cleaner your surface space, the better the paint would adhere. Now you’re ready to paint.
Paint the Tiles
Stir the paint and pour it into a cleaning working pot. Choose a higher-quality epoxy, latex, and oil paint that would adhere properly to the surface of the tiles.
• Epoxy is generally the most appropriate and durable for ceramic tiles around the kitchen floor and sink.
Use a small, angled brush for a roller and the edges for huger zones. Utilize a paintbrush to paint the edges and hard-to-reach spaces, like corners, foremost. If you have a huge surface to paint, utilize a roller to cover the tiles much faster. To ignore any overlapping brush strokes, begin in one corner and work your roller down the tiles and brush strokes, then across the space or wall.
• A roller would not get into the grout, so make certain you applied the paint with the brush here as well.
Applying several thin paint coats. Rather than apply a thick coat, it’s awesome to be patient and apply several thin coats permitting every coat to dry completely before adding on the next. Finally, perform the finishing touches by removing the painter’s tape carefully and permitting the final coat to properly cure for three to two days before you utilize the area.
To ignore the paint peeling and dating fast way, select the righteous tiles for the makeover and opt for zones that aren’t subjected to higher moisture and higher traffic. Wearing disposable gloves if you need to ignore getting any paint stains on the hands. Consider the material when selecting the paint. For instance, if you paint out ceramic tiles on kitchen countertops and floors, you must make certain the paint you selected working on ceramic.
